Ringdale - Connecting people and information

Key Features

Near zero power consumption
User can specify fail open or fail locked
Suitable for frame or surface mounting (optional surface mounting plate)
Compatible with most European self-latching type door mechanisms
12Volt (other versions available)
Operates with battery or power supply
Designed to European and British standards

Technical Specification

Dimensions (lock body):	Lock body only without Lip-bracket: 28 x 90 x 20 (mm) / 1.1 x 3.5 x .8 (inches)
Dimensions (complete lock):	Lock complete with short ANSI Lip-bracket and Faceplate fitted, Overall dimensions: 25 x 160 x 31 (mm) / 1 x 6.3 x 1.2 (inches)
Voltage:	12V DC nominal (10,2V DC to 15V DC operational) Input-Polarity protection via built-in rectifier Current Consumption: typ. 6,5mA @ 12V DC if permanently energized
Connector:	2-way Terminal Block
Mechanical Strength:	min. 810 pounds (3600N)
Temperature and Humidity:	0�C to 70�C / 32�F to 158�F -- operating temp. 0...80% non-condensing connection
Product Number:	00-16-0437-1252 (12V - Fail Open, PTL, for any system)

AC - Pulse D/Strike EURO STD (PTL) w/o FacePLT

Unique low power EURO door strike mechanism allows months of standby time
(open or locked) from a battery backup

Ringdale�s EURO Pulse Operated Door Strike provides economical use of electrical power. It operates with a pulse of just 0.1 seconds (100 milliseconds) to change from a locked to an unlocked position, or vice versa. It does not require permanent power to keep open or locked (in similar mechanisms this operation can take up to 10 watts).

The Door Strike is universally compatible with any other access control device. A selection of faceplates is also available to fit Ringdale�s EURO Door Strike (faceplates sold seperately).

Based on user specifications, Ringdale�s Door Strike is provided either to fail open (power to lock) or fail locked (power to open).

In the event of power failure, Ringdale�s Door Strike continues operation with a battery or an uninterruptable power supply, such as Ringdale�s optional Network Access Controller, a 12volt power supply with 17Ah battery back-up.

Ringdale�s Card Readers are controlled from a central software program over a 10/100base Ethernet network. In the event of a fire alarm, this software enables all doors for immediate access.

To use the Door Strike in conjunction with Ringdale�s Proximity Card Readers and Controllers, users simply wave an ID card (with a unique built-in code) in front of the reader unit. The event is logged and the door will unlock if the user has been granted access.