LightSpace Manager™ (LSM) is designed to be connected to an ActiveLED C-Series power supply. One LightSpace Manager can digitally control one or many ActiveLED lighting fixtures, allowing the adjustment of light levels and occupancy sensing to suit occupancy needs while saving significant amounts of energy.

LightSpace Manager is connected to the digital input of one ActiveLED lighting fixture using a 6-wire cable terminated with 6-pin RJ-12 connectors.

A group of controlled ActiveLED light fixtures can be interconnected to form an occupancy zone / lighting "network".

Occupancy Zone / Lighting "Network"

The number of ActiveLED lighting fixtures that can be controlled from a single LightSpace Manager is virtually limitless.
Each interconnected ActiveLED fixture / power supply relays the Manager settings to the next connected fixture via a 4-wire RJ11 / RJ12 communications cable, giving unlimited flexibility in managing a defined ActiveLED lighting occupancy zone or lighting "network".

The following diagram is one example of a building or room with three entrances and three LightSpace Managers controlling a lighting "network" or occupancy zone.

Depending upon the size and shape of the defined space and the number of entry and exit points, one LightSpace Manager can be combined with up to 10 (ten) separate motion / occupancy sensors in designing the occupancy zone to provide maximum energy savings. The perceived light level can be precisely adjusted from 0 to 100% in 2% increments to suit the particular requirements of the occupancy zone.

LightSpace™ Manager Programmability

LightSpace Manager is programmable to meet most lighting requirements via its easy-to-use user interface.
Light levels (dimming) can be programmed to suit local preferences in 2% increments, from 0 (off) to 100% (fully on).
The triggering of the occupancy sensor can be programmed in one minute increments from 1 to 540 minutes (9 hours), after which time it will dim the lights down to 50%.
The sensor can then be programmed in one minute increments to further reduce the lighting to zero, or a pre-defined low lighting level, after an additional 1 to 540 minutes. The Motion Sensor built into each ActiveLED LightSpace Manager has a range of 35 feet in a cone that is 50° from the perpendicular (100° total cone).

LightSpace™ Manager Operating Modes

The LightSpace Manage has three selectable modes of operation:

MODE	MODE DESCRIPTION
Auto	Enables both the Dimmer and Motion Sensor “automatic” functionality and the attached ActiveLED light fixtures will be managed by the LSM
On	Enables the Dimming up and down feature but disables the Motion Sensor
Off	Turns off the attached Ringdale ActiveLED lights (or down to the configured light level) and disables the Motion Sensor, while the background of the LightSpace Manager is lit to facilitate locating it in the dark

ActiveLED^® Brightness Settings and Fixture Power Consumption

Brightness Settings	Percent Power	ActiveLED® Brightness Settings relative to Fixture Power Consumption
100	100	The ActiveLED system architecture is unique in its efficiency, design and the way the ActiveLED Elements are driven. Combining this architecture with a LightSpace Manager or Rotary Digital Dimmer provides additional energy savings that are exponential to the reduced light level. As an example: An ActiveLED High Bay Strip with 104 watts total fixture (96 watts of LEDs) with the brightness dimmed down to brightness level 50, then the total power consumption of that fixture is about 16.64 watts (16% of 104 watts) at this brightness level of 50. This same chart and percentages not only apply to any of our lighting fixtures with the external dimming controls, including the Rotary Digital Dimmer and the LightSpace Manager, but also to any pre-programmed ActiveLED fixture. Please refer to the chart on the left for more details.
90	80
80	60
70	42
60	28
50	16
40	9
30	5
20	2.5
10	1.5

ActiveLED^® Technology

Ringdale uses the latest in energy efficient LEDs and LED modules producing equivalent or greater light output than fluorescent (HID) fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED^® Warranties

We provide mechanically robust LED lighting systems; our warranties are 10 years on LED elements, fixtures and the LightSpace Manager, 5 years on power supplies.

Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas and in the United Kingdom.

Optional Cables for the Digital LightSpace Manager

CABLE DESCRIPTION	CABLE PART NUMBER & DETAILS
Cable to connect one LightSpace Manager to one ActiveLED lighting fixture or one motion sensor	07-260600xx, available in 5', 10', 20', 30', 40', 50', 70' & 110' lengths. Other lengths available upon request
Cable to digitally interconnect two ActiveLED lighting fixtures	07-260664xx, available in 5', 10', 20', 30', 40', 50', 70' & 110' lengths. Other lengths available upon request

NOTE: Cables not included in the price of the LightSpace Manager.

LightSpace Manager™ Part Numbers:

00-27-0616-0000, US Faceplate
00-27-0616-0010, UK Faceplate