ActiveLED Billboard fixtures illuminate billboards, signs and building exteriors evenly with an enhanced light that is very close in color to natural daylight. With its unique design, the light is focused directly on the billboard, eliminating light pollution and resulting in significant energy savings – up to 90 percent. Additional energy savings can be achieved from the ActiveLED device’s optional daylight sensor and other intelligent controls.
The illumination of a standard 48' by 14' billboard requires just four ActiveLED Billboard light fixtures per side, 8 total, typically replacing 3,200 watts of traditional light fixures with just 408 watts of LED lighting.
The fixture design has optimized water management and cooling to be effective in the hottest of climates as well as performing without degradation down to -40°F (-40°C).
The only servicing required is the cleaning of the diffuser (equivalent to the cleaning of conventional street lights) at an approximate cost of US$ 5.25 annual cost per light fixture.
BillBoard Fixture Product Overview
Ringdale provides two models of ActiveLED Billboard Lighting fixtures.
|
Product
Code |
Product Suitability |
Light Equivalence
Incandescent / FL |
Suggested Billboard
Size (H x W) |
BB-5552H |
Rural Billboard |
600 / 100 watts |
14 ft x 48 ft |
BB-5575H |
Suburban Billboard |
800 / 150 watts |
14 ft x 48 ft |
ActiveLED® Technology
Ringdale uses the latest in energy efficient LEDs and LED modules. Our electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).
ActiveLED® Diffuser Technology
We use state-of-the-art diffuser technology with a minimal amount of light loss within the fixture providing for maximum lighting efficiency.
ActiveLED® Warranties
We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements and fixtures, 5 years on power supplies.
Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.
NOTE: Mounting brackets not included, brackets sold separately.
Mounting bracket kit part number: 00-27-0002-0001.
BillBoard Light Part Numbers:
00-27-5601-5552, 52 Watts
00-27-5601-5575, 75 Watts
