ActiveLED^® Light Fixtures are energy efficient, high performance for illuminating a broad set of applications, including indoor, offices, outdoor, trails, walkways, streets, parking lots, canopies and other pedestrian areas.

ActiveLED^® light fixtures consume at least 50-85 percent less energy than conventional lighting and can be configured with a variety of options that provide additional energy savings.

With its patented design and superior LED elements, ActiveLED lights are a reliable light source with a 90,000-hour lumen life, making them a maintenance-free solution for applications where changing bulbs and ballasts can be hazardous, expensive or difficult.

Application

The LightSpace™ Digital / Rotary Dimmer is designed to be connected to ActiveLED^® C-Series power supplies / fixtures and one Digital Dimmer can be used to dim one or many ActiveLED lighting fixtures, providing the ability to adjust light levels to suit user needs while saving even more energy.

Unlike conventional dimmers, the LightSpace™ Digital / Rotary Dimmer reduces the power consumption of the ActiveLED lights in proportion to the dimming percentage. For example, dimming the lights by 50% also reduces the power consumption exponentially and therefore energy costs.

The digital dimmer is connected to the dimmer input of one ActiveLED lighting fixture using a 6-wire cable terminated with 6-pin RJ-12 connectors.

A group of dimmable ActiveLED light fixtures (ActiveLED C-Series power supplies) can be interconnected using a 4-wire communication link that is terminated in an RJ-11 / RJ-12 connector.

ActiveLED^® Occupancy Zone

The number of ActiveLED lighting fixtures that can be controlled from a single AcriveLED dimmer is virtually limitless. Each interconnected LED power supply repeats the digital dimming setting to the next connected power supply, thereby giving unlimited flexibility in managing a defined ActiveLED lighting Occupancy Zone.

Adding a motion/occupancy sensor to the configuration offers additional management capabilites, further reducing power consumption and therefore energy costs of the lighting fixtures within the occupancy zone.
Depending upon the size and shape of the defined space and the number of entry and exit points, one dimmer can be combined with up to 10 (ten) motion/occupancy sensors in designing the Occupancy Zone to provide the maximum energy savings.

ActiveLED^® Brightness Settings and Fixture Power Consumption

Brightness Settings	Percent Power	ActiveLED® Brightness Settings relative to Fixture Power Consumption
100	100	The ActiveLED system architecture is unique in its efficiency, design and the way the ActiveLED Elements are driven. Combining this architecture with a LightSpace Digital Rotary Dimmer or LightSpace Manager provides additional energy savings that are exponential to the reduced light level. As an example: A High Bay Strip with 104 watts total fixture (96 watts of LEDs) with the brightness dimmed down to level 50, then the total power consumption of that fixture is about 16.64 watts (16% of 104 watts) at this brightness level of 50. This same chart and percentages not only apply to any of our lighting fixtures with the external dimming controls, including the Rotary Digital Dimmer and the Light Space Manager, but also to any pre-programmed Ringdale ActiveLED fixture. Refer to the chart on the left for more details.
90	80
80	60
70	42
60	28
50	16
40	9
30	5
20	2.5
10	1.5

Optional Cables for the ActiveLED Digital Dimmer

CABLE DESCRIPTION	CABLE PART NUMBER & DETAILS
Cable to digitally connect one Digital Dimmer to one Ringdale lighting fixture or one LightSpace Manager or motion sensor.	07-260600xx, available in 5', 10', 20', 30', 40', 50', 70' & 110' lengths. Other lengths available upon request.
Cable to digitally interconnect two Ringdale ActiveLED lighting fixtures.	07-260664xx, available in 5', 10', 20', 30', 40', 50', 70' & 110' lengths. Other lengths available upon request.

NOTE: Cables not included in the price of the Dimmer.

ActiveLED^® Technology

Ringdale uses the latest in energy efficient LEDs and LED Modules producing equal or greater light output than fluorescent light fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED^® Warranties

We provide mechanically robust LED lighting systems; our warranties are 10 years on LED elements, fixtures and the Digital Rotary Dimmer, 5 years on power supplies.

Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas and in the United Kingdom.

Dimmer Part Number: 00-27-0607-0000