An Energy Conserving Lighting Solution for developers, architects and municipalities alike that are faced with ever increasing energy cost. Ringdale ActiveLED™ Street and Path lighting systems offer an opportunity to convert to environmentally safe LED Street and Path Lighting.

Significant savings from the device's motion sensor and daylight sensor energy management features.

The only servicing required is the cleaning of the diffuser (equivalent to the cleaning of conventional street lights) at an approximate cost of US$ 5.25 annual cost per light.

Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, 5 years on other materials and workmanship and 3˝ years on batteries and super-capacitors.

Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

Product Overview

Ringdale provides four basic sizes (light output) of Professional ActiveLED Light Fixtures for different applications:

Product Code	Suitability	Light Equivalent Incandescent/FL	Suggested Pole Height m/ft
SLE-5508	Walk Path	50 / 12 watt	2.4 m / 8 ft
SLE-5515	Walk Path	100 / 30 watt	3.0 m / 10 ft
SLE-5528	Parking Lot	200 / 45 watt	4.0 m / 13 ft
SLE-5550	Street / Highway	450 / 100 watt	6.0 m / 20 ft

ActiveLED™ Technology

Ringdale uses the latest in energy efficient LEDs and LED Modules producing equal or greater light output than state-of-the-art fluorescent light emitters. Our electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (95% Luminous Flux).

ActiveLED™ Diffuser Technology

We use state-of-the-art diffuser technology with a minimal amount of light loss within the fixture providing for maximum lighting efficiency.

To meet varying application requirements, the Ringdale ActiveLED Street Lights can be configured with or without a second diffuser. The second diffuser completely seals the underside of the fixture while the reflectors containing the LEDs are sealed whether the second diffuser is present, or not.

The Ringdale ActiveLED Street Light without the second diffuser maintains the uniform light pattern and increases the task pattern. This is ideal for installations where a higher light level is required at the outer areas of the light pattern as it increases luminance by 20-40%, depending on the angle of light emanating from the fixture.

ActiveLED™ Light Pattern Options

The Ringdale ActiveLED Street Lights are available in either Traditional or Wide light pattern configurations.

The Traditional Pattern, mounted at 20 feet high, projects light 3-4 feet behind the pole and has an illumination pattern on the street-side in an arc of about 30 feet.

The Wide Pattern has a broad uniform light coverage. Mounted at 20 feet high, it has a very precise 1-2 foot curb-side cut-off with very little light projected behind the curb line. It has an illumination pattern on the street-side in an arc of about 40-50 feet on each side of the curb line extending to 60 feet perpendicular at 90 degrees from the curb line on the street side.

NOTE: Pole and Pole Base are not included in the price.

Part Numbers:

00-27-1602-5508

00-27-1602-5515

00-27-1602-5528

00-27-1602-5550