Ringdale - Connecting people and information

Key Features

Compatible with 3-phase/3-wire, 3-phase/4-wire, and other 3-phase services
12 bit accuracy, up to 100 million samples on local USB Flash memory stick.
Remote Monitoring and infinite sampling at high precision through Ethernet connection
Highly accurate; supports IEC 60687, IEC 61036, IEC 61268, IEC 62053-21, IEC 62053-22, and IEC 62053-23
Less than 0.1% active energy error over a dynamic range of 1000 to 1 at 25°C
Active/reactive/apparent energy, voltage rms, current rms, and sampled waveform data
User-programmable thresholds for line voltage sag and overvoltage detections.
High accuracy over large variations in environmental conditions and time
Optional current transformers include; 0-200A No Resistor, 5A, 10A, 15A, 20A, 25A, 30A, 50A, 60A, 70A, 100A, 200A.

Technical Specification

Power Supply:	External All Voltage, Input 12 volt DC, 1A Supply
Power Consumption:	3 watts typical
Operating Temperature:	–40°C to +85°C
Network Type:	Ethernet 10/100baseTx, RJ-45
Channel Input Voltage:	0..480 Volts AC (RMS)
Data Collection:	USB Thumb Drive or via Ethernet to a PC running application
Product Content:	* A DataLogger * 150A current transformers, qty 3 * USB Memory Stick * CD with management software
Part Number:	00-11-0569-1100

Energy Monitor - DataLogger for 1 or 3-phase power system - Ethernet Connected - USA

This device measures RMS current and voltage providing accurate logging of energy used in real-time when connected to an Ethernet network

The Ringdale CT-Datalogger has the ability to alarm, e.g. send email, in the event of a high or low current event or other programmed criteria such as power outage, low voltage or a voltage surge as well as keeping a record of energy use.

Ideal in applications where accurate monitoring of Energy use is required in many locations such as high rise buildings where the use per tenant or per floor is required. Or in a factory to identify faults that result in significant energy wastage.

The CT-Datalogger can collect vast amounts of accurate data either through its fast Ethernet connection to a central point or on an included USB Memory device.

There are two versions of the device, a USB version to connect to a PC or Laptop and an Ethernet version for central data collection, email alerts and remote monitoring.

Instead of an Ethernet Network Connection the device may also be ordered with a USB Connection, part number: 00-11-0569-0003

The unit is supplied with three 150A current transformers. Other sizes are available on request.

The current transformers are the split core type with a 0.75" internal diameter for wire sizes up to 250MCM THW. Outside dimensions are 2.0"x2.1". This particular form factor CT is available in full scale ratings of 5 to 200 amps.

Larger sized split core CTs are available with inside diameters of 1.25" and 2.00" with full scale currents to 1500A from magnelab.com. It is best not to oversize the full scale amperage since resolution and accuracy will suffer.

The unit is compatible with 333mV output current transformers only.

The Ethernet device has a built-in web server so it can be set-up and managed using a web-browser as well as getting a waveform snapshot of current or voltage.

Part Number: 00-11-0569-1100